Pelican 3D Marine Seismic Survey
The CarbonNet Project conducted a marine seismic survey in Bass Strait in February 2018.
The purpose of the survey was to gain deeper knowledge of the underlying geology of the area to help confirm the potential for geological carbon dioxide (CO2) storage. Preparation for the survey involved stakeholder consultation and regulatory and environmental approvals.
Find out about:
- Survey method and equipment
- Survey completion
- Modelling of CO2 storage
- Release of the Pelican 3D MSS data
Survey method and equipment
Seismic surveying is commonly used in the resources industry to gain a better understanding of subsurface geology.
Marine seismic surveys are carried out by a specialised vessel towing a sound wave source that produces sound pulses in a controlled frequency range at set intervals.
The sound signals are reflected back by underground rock formations and are captured by hydrophones (acoustic receivers) in 'streamers' that are also towed by the vessel. The data collected by the hydrophones is recorded on board the vessel for later analysis and interpretation.
Image used with permission from FishSAFE Information Project 2017 – FishSAFE.org.
The survey covered approximately 166km2 offshore from Golden Beach (between Loch Sport and Seaspray), Gippsland.
The survey took place within the greenhouse gas assessment permits:
- VIC-GIP-002 (in Commonwealth waters)
- GGAP006386(V) (in Victorian waters) managed by CarbonNet.
The seismic survey was completed in February 2018.
The survey was acquired during February 2018, using the Polarcus Naila a purpose-built seismic vessel towing eight recording cables (‘streamers’), each 4km long. The survey vessel was escorted by two scout vessels to check that the water depth was as previously mapped, and that no sandbanks had shifted to pose a risk to the environment, the vessel, or its equipment.
The survey was completed safely with no environmental incidents or disturbance of marine animals or plants, as confirmed by pre- and post-survey environmental assessments.
Modelling of CO2 storage
Once the full seismic interpretation was completed, geological modelling took place in order to determine the optimal location for the Gular-1 offshore appraisal well.
The image below is representative of a seismic crossline from the 3D MSS.
Release of the Pelican 3D MSS data
The Pelican 3D marine seismic survey data and the Seismic Acquisition and Processing reports will be available from the National Offshore Titles Administrator (NOPTA) from early March 2021.
The data will be publicly accessible to download via NOPIMS or via request from NOPTA.
Valuable data acquired in the survey has now been processed and interpreted. The interpretation confirms earlier data showing that the Pelican structure is robust and large enough to hold significant volumes of greenhouse gases.
Page last updated: 01 Dec 2021